INSTALLATION GUIDE
PACKAGE CONTENTS
- AC Motor
- Motor Housing
- Impeller Housing
- Magnetic Impeller
- Cap Cover
WARNING: PLEASE READ AND FOLLOW INSTRUCTIONS BEFORE USING THE EQUIPMENT. ALWAYS UNPLUG THE POWER TO SPA BEFORE SERVICING TO REDUCE THE RISK OF ELECTRIC SHOCK AND/OR PERSONAL INJURY.
INSTALLATION INSTRUCTIONS
Replacing Jet: Disconnect the plumbing at the rear of the spa if necessary. Lift the front of the spa off the floor by one to two feet from the ground or tilt the spa on its side and properly support the spa. remove the exisiting motor.
Apply a thin
amount of silicone
around the rim.
Insert the motor through the spa basin. Position the black trench marks to 12 o’clock.
Use a Phillips screwdriver to secure 4 mounting screws and connect AC power accordingly.
Position black trench marks on Motor Housing and Impeller Housing to 12 o’clock.
MAINTENANCE
To replace Motor, turn the
Motor counter-clockwise.
INSTALLATION VIDEOS
How To Replace EcoJet Motor
How To Replace EcoJet Set 3.0 Housing & Motor
